Lexmark XM1135, Руководство по обслуживанию

Страница: 247 / 510

Action for Prompts
This setting enables a user to determine which input source would receive paper-related or envelope-related
change prompts when they occur. Regardless of the target source, the printer always requires some type of
user assistance to resolve the change prompt (examples: pushing a button to ignore the prompt and changing
the source’s installed media). However, this setting gives a user the option of having the printer resolve change
prompt situations without requiring any user assistance.
To change this setting:
1
From the Configuration menu, navigate to Action for Prompts .
2
Select from the available options to change the setting.
•
Prompt User (default)
•
Continue
•
Use Current
3
Depending on the printer model, press OK or touch to save the setting, or press X to return to the
Configuration menu without saving any changes.
When set to Prompt user , the printer behaves like the past implementation. When a change prompt occurs,
the printer stops printing, posts the change prompt to the target source, and waits for the user to select an
action before continuing.
When set to Continue , the printer automatically assumes that the user selects Continue every time a change
prompt is encountered. Likewise, when the device is set to Use Current , all change prompts will perform as if
Use Current was selected by the user.
Jobs on Disk
This setting appears only if a hard disk is installed. It allows buffered jobs to be deleted from the disk. This does
not affect Print and Hold or parked jobs.
To change the setting:
1
From the Configuration menu, navigate to Jobs on Disk .
2
Select from the available options to change the setting:
•
Delete
•
Do Not Delete (default)
3
Press X to return to the Configuration menu.
7015
Service menus
247