Lexmark XC9325 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 438

background image

CAUTION—POTENTIAL INJURY:

Do not cut, twist, bind, crush, or place heavy objects on the power

cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects
such as furniture and walls. If any of these things happen, a risk of ﬁre or electrical shock results. Inspect
the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet
before inspecting it.

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, make sure that all external

connections (such as Ethernet and telephone system connections) are properly installed in their marked
plug-in ports.

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, if you are accessing the controller

board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them off as well, and unplug any cables going into the
printer.

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, do not use the fax feature during a

lightning storm.

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock when cleaning the exterior of the

printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before
proceeding.

CAUTION—POTENTIAL INJURY:

If the printer weight is greater than 20 kg (44 lb), then it may require

two or more people to lift it safely.

CAUTION—POTENTIAL INJURY:

When moving the printer, follow these guidelines to avoid personal

injury or printer damage:

•

Make sure that all doors and trays are closed.

•

Turn off the printer, and then unplug the power cord from the electrical outlet.

•

Disconnect all cords and cables from the printer.

•

If the printer has separate ﬂoor-standing optional trays or output options attached to it, then disconnect
them before moving the printer.

•

If the printer has a caster base, then carefully roll it to the new location. Use caution when passing over
thresholds and breaks in ﬂooring.

•

If the printer does not have a caster base but is conﬁgured with optional trays or output options, then remove
the output options and lift the printer off the trays. Do not try to lift the printer and any options at the same
time.

•

Always use the handholds on the printer to lift it.

•

Any cart used to move the printer must have a surface able to support the full footprint of the printer.

•

Any cart used to move the hardware options must have a surface able to support the dimensions of the
options.

•

Keep the printer in an upright position.

•

Avoid severe jarring movements.

•

Make sure that your ﬁngers are not under the printer when you set it down.

•

Make sure that there is adequate clearance around the printer.

CAUTION—TIPPING HAZARD:

Installing one or more options on your printer or MFP may require a

caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported conﬁgurations, see

www.lexmark.com/multifunctionprinters

.

Safety information

7

«
...
5
6
7
8
9
...
»

Содержание XC9325























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для XC9325

Бренд: QMS Страницы: 122

Бренд: QMS Страницы: 306

Бренд: DataCard Страницы: 2

Бренд: TallyGenicom Страницы: 92

Бренд: Olivetti Страницы: 149

Бренд: NBS Technologies Страницы: 64

Бренд: Printekmobile Страницы: 2

Бренд: Ricoh Страницы: 552

Бренд: Ricoh Страницы: 37

Бренд: Ricoh Страницы: 284

WORKCENTRE 7428

Бренд: Xerox Страницы: 208

EMBEDDED UNIT EU

Бренд: Epson Страницы: 28

Бренд: Epson Страницы: 4

Бренд: Epson Страницы: 4

Бренд: Epson Страницы: 2

Бренд: Epson Страницы: 2

Бренд: Epson Страницы: 1

EcoTank ET-1110 Series

Бренд: Epson Страницы: 96

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды