Lexmark XC9325 Скачать руководство пользователя страница 202

Страница: 202 / 438

Menu item

Description

Substitute Size

Off

Statement/A5

Letter/A4

11 x 17/A3

All Listed*

Set the printer to substitute a speciﬁed paper size if the requested size is not
loaded in any paper source.

Notes:

•

Off prompts the user to load the required paper size.

•

All Listed allows all available substitutions.

Conﬁgure MP

Cassette*

Manual

First

Determine the behavior of the multipurpose feeder.

Notes:

•

Cassette conﬁgures the multipurpose feeder as the automatic paper
source.

•

Manual sets the multipurpose feeder only for manual-feed print jobs.

•

First conﬁgures the multipurpose feeder as the primary paper source.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Media Conﬁguration

Universal Setup

Menu item

Description

Units of Measure

Inches

Millimeters

Specify the unit of measurement for the universal paper.

Note:

Inches is the U.S. factory default setting. Millimeters is the

international factory default setting.

Portrait Width

3.5–19 inches (8.5*)

88.9–482.6 mm (216*)

Set the portrait width of the universal paper.

Portrait Height

3.5–19 inches (14*)

88.9–482.6 mm (356*)

Set the portrait height of the universal paper.

Feed Direction

Short Edge*

Long Edge

Set the printer to pick paper from the short edge or long edge
direction.

Note:

Long Edge appears only when the longest edge is shorter

than the maximum width supported.

Multiple Universal Sizes

Tray [x]

Multipurpose Feeder

Assign a unique dimension for multiple universal sizes that are loaded
in each paper source.

Note:

This setting appears only when enabled in the Device menu.

From the home screen, touch

Settings

Device

Maintenance

Conﬁguration Menu

Tray Conﬁguration

Multiple Universal

Sizes

Note:

An asterisk (*) next to a value indicates the factory default setting.

Use printer menus

202

Содержание XC9325























































































































































































































































































































































































































































Результаты поиска

Содержание XC9325

Отзывы:

Похожие инструкции для XC9325

Бренды по названию

Популярные бренды

Lexmark XC9325, Руководство пользователя

Результаты поиска

Содержание XC9325

Отзывы:

Похожие инструкции для XC9325

Бренды по названию

Популярные бренды