Lexmark Optra T620n, Руководство по установке, Страница: 25 / 38

23
Step 3: Load print material
Complete these instructions to load print material
into any of the standard or optional trays. All paper
trays are loaded in the same way.
1
Remove the paper tray.
2
Pull the width guide tab and slide the width
guide to the far right side of the tray.
3
Squeeze the length guide lever and slide the
length guide to the correct position for the
size paper you are loading.
Note: If a finisher is installed on the printer, see
the Lexmark T Family Quick Reference or
the Lexmark T620/T622 Publications CD
for special paper loading instructions.
.
4
Place the paper into the paper tray with the
recommended print side face down for
single-sided printing and face up for duplex
printing.
Do not fill paper above the paper
capacity mark (fill line) .
5
Pull the width guide tab and slide the width
guide
to the left until it lightly rests against
the edge of the paper stack.
6
Adjust the knob to show the size of the
paper currently loaded.
Note: This setting serves as a visual reminder
only; it has no effect on the operation of
the printer.
7
Reinstall the tray.
Width guide
Width guide
tab
Paper size indicators
Length guide
Length guide
lever
Width guide
Width
guide tab
Paper capacity
mark
Knob