Lexmark Optra T522, Руководство по обслуживанию

Страница: 130 / 333

Diagnostic Information
2-103
Infoprint 1120 and 1125
Transfer Roll Service Check
Service Tip: The transfer roll is 51.02 mm (2.009 inch)
circumference. Any print quality problems such as lines that are
spaced 51.02 mm apart indicate you should check the transfer roll
for damage, toner or foreign material buildup.
Service Tip: The transfer roll assembly is part of the Maintenance Kit
and is replaced when a '80 Scheduled Maintenance” message
displays. Ask the customer if they have replaced the transfer roll
recently.
CAUTION: Make sure the printer is powered off before making any
checks on the transfer roll or associated parts for personal safety
and to prevent damage to the printer.
FRU Action
1 Transfer Roll Assembly Check the transfer roll for any signs
of toner buildup, surface damage to
the roll, oil or other contaminants on
the surface of the roll. Replace the
transfer roll as necessary.
2 Left Transfer Arm
Assembly Check the left transfer roll arm
assembly to make sure it is fastened
and locked in the down position. If
the arm is not locked down, check to
ensure the arm is not broken and will
lock into the EP frame correctly.
Check the left transfer arm assembly
spring for proper operation.