Lexmark Optra M410, Руководство пользователя

Страница: 94 / 312

82
Chapter 3: Using the Operator Panel and Menus
TRAY RENUMBER Assign MP Feeder
Assign Tray 1
Assign Tray 2
Assign Man Paper
Assign Man Env
Each of the above menu items supports the following three values:
Off*
0 ... 199
None
VIEW FACTORY DEF
Restore Defaults
Yes
No
Note:
Assign Tray 2
only displays if the optional 500-sheet drawer is installed.
Assign MP Feeder
only displays when
Configure MP
is set to
Cassette
.
Only installed paper sources display on the operator panel as values. However, you may set
TRAY RENUMBER
to uninstalled sources.
The
TRAY RENUMBER
menu item lets you configure your printer to work with printer drivers
or applications that use different source assignments to request a given input source.
Select
Off
to use the factory default paper source assignments.
Select a numeric value (
0 ... 199
) to assign a custom value to a paper source.
Select
VIEW FACTORY DEF
to view the factory default values assigned to each paper source.
In the
Restore Defaults
menu item, select
Yes
to return all tray assignments to factory default
values.
See “Paper Sources and Sizes” on page 116 for information on available paper sources for
your printer.
Refer to the Technical Reference for more information about assigning source numbers.
Auto CR after LF Off*
On
The
Auto CR after LF
setting determines if the printer automatically performs a carriage return
after a line feed control command.
Auto LF after CR Off*
On
The Auto LF after CR setting determines if the printer automatically performs a line feed after
a carriage return control command.
PCL Emul Menu (continued)
Menu Item Values
*Factory default