Lexmark Optra M410, Руководство пользователя, Страница: 90 / 312

78
Chapter 3: Using the Operator Panel and Menus
Job Accounting Off*
On
If
Job Accounting
is set to
On
, the installed hard disk option stores statistical information
about the most recent printer jobs. The statistics include whether the job printed with or
without errors, the time required to print the job, the size (in bytes) of the job, the requested
paper size and paper type, the total number of printed pages, and the number of copies
requested.
To print a listing of all the accumulated statistics, select
Print
from the
Job Acct Stat
menu
item in the
UTILITIES MENU
. See
Job Acct Stat
on page 59 for more information.
The
Job Accounting
menu item does not display if the installed disk option is defective or
Read/Write or Write protected, or if
Job Buffer Size
is set to
100%
. See
Job Buffer Size
on
page 77 for more information.
Job Acct Limit Disabled
10…1000* (in increments of 1 job)
If a hard disk option is installed in your printer, you can use the hard disk to store statistical
information about a specified number of jobs. The value you select from the
Job Acct Limit
menu item determines the number of jobs for which statistics are stored. Once you reach the
job limit, statistics for the oldest job are deleted as new statistics are stored, maintaining
statistics for the specified number of jobs.
If you select
Disabled
, the number of jobs for which statistics are stored is limited to the
memory available on the hard disk.
The
Job Acct Limit
menu item does not display if the installed hard disk option is defective or
Read/Write or Write protected, or if
Job Buffer Size
is set to
100%
. See
Job Buffer Size
on
page 77 for more information.
Warning: When you change the
Job Acct Limit
value, all statistical information stored on the
disk option is discarded.
Setup Menu (continued)
Menu Item Values
*Factory default