Lexmark Optra M410 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 312

Lexmark Optra M410 Скачать руководство пользователя страница 45

33

Using the Operator Panel and Menus

3

Using the

Operator Panel

and Menus

This chapter contains information about using the
operator panel, changing printer settings, and under-
standing operator panel menus.

You can change most printer settings from your software
application or printer driver. Settings you change from the
application or driver apply only to the job you are prepar-
ing to send to the printer.

Note:

Changes made to

printer settings from a software
application override changes
made from the operator panel.

If there is a setting you cannot change from your software
application, use the operator panel or the remote operator
panel available from the MarkVision utility. See “MarkVi-
sion” on page 25 for information about MarkVision.
Changing a printer setting from the operator panel or
from MarkVision makes that setting the user default.

If you are familiar with using an operator panel similar to
this, you may want to skip to “Overview of
Printer Menus” on page 43.

«
...
43
44
45
46
47
...
»

Содержание Optra M410

























































































































































































































































































































Отзывы:

Нет отзывов