Lexmark Optra M410 Скачать руководство пользователя страница 237

Страница: 237 / 312

225

Installing the Optional Drawer

Place the printer on top of the support unit.

Make sure the edges of the printer and the support
unit are aligned properly.

Load print material in the input tray.

See “Loading Print Material” on page 124 for more
information.

Install the input tray in the support unit.

Reconnect all cables to the back of the printer.

Plug the printer power cord into a properly
grounded electrical outlet.

Turn the printer power On (|).

When

Ready

displays, press

Menu>

to enter the

menus.

Note:

Verify that the optional

drawer is installed properly. See
“Verifying the Installation of
Options” on page 229.

Set the

PAPER SIZE

PAPER TYPE

, and

PAPER

LENGTH

menu settings for this paper source.

See

PAPER SIZE

on page 45,

PAPER TYPE

on page 47,

and

PAPER LENGTH

on page 52 for more informa-

tion.

Press

to return to the

Ready

state.

If an error message appears, see “Understanding
Printer Messages” on page 151.

Содержание Optra M410

























































































































































































































































































































Результаты поиска

Содержание Optra M410

Отзывы:

Lexmark Optra M410, Руководство пользователя, Страница: 237 / 312

Результаты поиска

Содержание Optra M410

Отзывы: