Lexmark Optra M410 Скачать руководство пользователя страница 201

Страница: 201 / 312

189

Possible Paper Jam Areas

Note:

To clear paper jam

attendance messages, you must
remove all jammed print material
from the paper path.

Exiting to the Standard Output Bin

Print material jams before it exits completely into the
standard output bin.

Pull the print material straight out.

If there is resis-

tance to the print material and it does not move
immediately when you pull, stop pulling and con-
tinue with the next step.

Open the upper front door to release the fuser
rollers.

Pull the print material straight out.

Note:

To avoid tearing, pull the

jammed print material out gently
and slowly.

Содержание Optra M410

























































































































































































































































































































Результаты поиска

Содержание Optra M410

Отзывы:

Lexmark Optra M410, Руководство пользователя, Страница: 201 / 312

Результаты поиска

Содержание Optra M410

Отзывы: