Lexmark Optra M410 Скачать руководство пользователя страница 166

Страница: 166 / 312

154

Chapter 6: Understanding Printer Messages

Network Card
Busy

The optional internal print server is being reset. The

Network 1 Setup

menu item in the

NETWORK MENU

is not available while this message displays.

No button actions are possible while this message displays.

Not Ready

The printer is in the

Not Ready

state, which means it is not ready to receive or process

data.

• Press

to take the printer out of the

Not Ready

state.

• Cancel the current job. Press

Menu>

<Menu

. The

JOB MENU

displays. Press

Menu>

<Menu

until

Cancel Job

appears on the second line of the operator panel

display. Press

Select

• Reset the printer. Press

Menu>

<Menu

. The

JOB MENU

displays. Press

Menu>

<Menu

until

Reset Printer

appears on the second line of the operator panel

display. Press

Select

Note: Resetting the printer deletes all current data from the print buffer, including all
Print and Hold jobs. See

Reset Printer

on page 70 for more information.

Performing
Self Test

The printer is running the normal series of start-up tests after it is powered On (|).
When the tests are complete, the printer returns to the

Ready

state.

No button actions are possible while this message display.

Power Saver
<warning>

The printer is in Power Saver mode.

• Press

to take the printer out of Power Saver mode.

• Press

Menu>

<Menu

to enter the menus.

• Press

Stop

to take the printer offline. The

Not Ready

message displays. No data is

processed. Press

to return the printer to

Power Saver

Warning messages are displayed on line 2 of the operator panel. See “Warning
Messages” on page 158 for more information.

Status Message

Meaning and Actions Allowed While Message Displays

Содержание Optra M410

























































































































































































































































































































Результаты поиска

Содержание Optra M410

Отзывы:

Lexmark Optra M410, Руководство пользователя, Страница: 166 / 312

Результаты поиска

Содержание Optra M410

Отзывы: