Lexmark Optra M410, Руководство пользователя, Страница: 104 / 312

92
Chapter 3: Using the Operator Panel and Menus
Network Buffer Auto*
3K to maximum size allowed
You can configure the size of the network input buffer to meet the requirements of your
system. If the limited size of the network buffer is preventing you from continuing work in your
software application each time you send a job to the printer, you may want to increase the
buffer size.
The maximum size available for modification depends on the amount of memory in your
printer, the size of the other link buffers, and whether
Resource Save
is set to
On
or
Off
. To
maximize the range for the network buffer size, you can disable or reduce the size of the
parallel and USB buffers.
Choose
Auto
to let the printer calculate the buffer size proportional to the total amount of
available printer memory. In most cases,
Auto
is the recommended setting.
Note: Changing the
Network Buffer
setting automatically resets the printer.
Network 1 Setup Values for this menu item are supplied by the specific network card. Open the menu to see the
available values.
For more information, refer to the documentation that comes with your network option.
Network Menu (continued)
Menu Item Values
*Factory default