Lexmark Optra M410, Руководство пользователя

Страница: 102 / 312

90
Chapter 3: Using the Operator Panel and Menus
Parity Even
Odd
None*
Ignore
This setting lets you select the parity for serial input and output data frames.
Even
The port expects to receive data frames with an even number of logical 1’s per
byte. The port transmits XOFF and XON with even parity. If the port detects a
parity error, the port sends an inverted question mark to the printer instead of the
character sent by the host system.
Odd
The port expects to receive data frames with an odd number of logical 1’s per
byte. The printer transmits XOFF and XON with odd parity. If the printer detects a
parity error, the port sends X'5F' to the printer instead of the character sent by the
host system.
None
The port expects no parity bit when it receives data. The port transmits XON and
XOFF without parity bits.
Ignore
The port expects a parity bit when the port receives a data frame. The port
ignores the parity bit. The port uses even parity when it transmits XON and XOFF.
Refer to the Technical Reference for more information about parity.
Honor DSR
(only available if
configured for
RS-232) Off*
On
Honor DSR
determines if the printer uses the Data Set Ready (DSR) signal. DSR is one of the
handshaking signals for most serial interface cables. If
Honor DSR
is set to
Off
, data received
by the serial interface is seen as valid data. If
Honor DSR
is set to
On
, only data received
while the DSR signal is in high condition is treated as valid data.
The serial interface uses DSR to distinguish data sent by the computer from data created by
electrical noise in the serial cable. This electrical noise can cause stray characters to print.
Set
Honor DSR
to
On
to prevent stray characters from printing.
Serial Menu (continued)
Menu Item Values
*Factory default