Lexmark MX910 Series, Руководство пользователя

Страница: 340 / 363

Mode Description Power consumption (Watts)
Printing The product is generating hard
‑
copy output from electronic
inputs.
675 (MX910de); 710 ( MX911de,
MX911dte); 750 (MX912de, MX912dxe)
Copy The product is generating hard
‑
copy output from hard
‑
copy
original documents.
810 (MX910de); 830 ( MX911de,
MX911dte); 850 (MX912de, MX912dxe)
Scan The product is scanning hard
‑
copy documents. 125 (MX910de); 130 ( MX911de,
MX911dte); 135 (MX912de, MX912dxe)
Ready The product is waiting for a print job. 110 (MX910de); 115 ( MX911de,
MX911dte); 120 (MX912de, MX912dxe)
Sleep Mode The product is in a high
‑
level energy
‑
saving mode. 17
Hibernate The product is in a low
‑
level energy
‑
saving mode. 1.0
Off The product is plugged into an electrical outlet, but the power
switch is turned off. 0.35
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous
power draws may be substantially higher than the average.
Values are subject to change. See www.lexmark.com for current values.
Sleep Mode
This product is designed with an energy-saving mode called Sleep Mode . The Sleep Mode saves energy by lowering
power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product
is not used for a specified period of time, called the
Sleep Mode Timeout .
Factory default Sleep Mode Timeout for this product (in minutes): 20
By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 120 minutes. Setting
the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response time of the product.
Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more energy.
Hibernate Mode
This product is designed with an ultra
‑
low power operating mode called Hibernate mode . When operating in Hibernate
Mode, all other systems and devices are powered down safely.
The Hibernate mode can be entered in any of the following methods:
• Using the Hibernate Timeout
• Using the Schedule Power modes
•
Using the Sleep/Hibernate button
Factory default Hibernate Timeout for this product in all countries or regions 3 days
The amount of time the printer waits after a job is printed before it enters Hibernate mode can be modified between
one hour and one month.
Notices 340