Lexmark MX910 Series, Руководство пользователя

Страница: 240 / 363

Copying printer settings to other printers
Note: This feature is available only in network printers.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four
sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click the Copy Printer Settings .
3
To change the language, select a language from the drop-down menu, and then click Click here to submit language .
4
Click Printer Settings .
5
Type the IP addresses of the source and target printers in their appropriate fields.
Note: If you want to add or remove a target printer, then click Add Target IP or Remove Target IP .
6
Click Copy Printer Settings .
Configuring supply notifications from the Embedded Web
Server
You can determine how you would like to be notified when supplies run nearly low, low, near end
‑
of
‑
life, or reach their
end
‑
of
‑
life by setting the selectable alerts.
Note: The percentage of estimated remaining supply that prompts the alert can be set on some supplies for some
supply conditions.
1
Open a Web browser, and then type the printer IP address.
2
Click Settings > Print Settings > Supply Notifications .
3
From the drop
‑
down menu, select one of the following notification options:
Notification Description
Off The normal printer behavior for all supplies occurs.
SNMP Only The printer generates a Simple Network Management Protocol (SNMP) alert when the
supply condition is reached. The status of the supply appears on the menus page and status
page.
E
‑
mail The printer generates an e
‑
mail when the supply condition is reached. The status of the
supply appears on the menus page and status page.
Warning The printer displays the warning message and generates an e
‑
mail about the status of the
supply. The printer does not stop when the supply condition is reached.
Continuable Stop
1 The printer stops processing jobs when the supply condition is reached, and the user needs
to press a button to continue printing.
1
The printer generates an e-mail about the status of the supply when supply notification is enabled.
2
The printer stops when some supplies become empty to prevent damage.
Managing the printer 240