Lexmark MX910 Series, Руководство пользователя

Страница: 126 / 363

Use To
Bin [x] Specify a custom name for Bin [x].
Universal Setup menu
Use To
Units of Measure
Inches
Millimeters
Identify the units of measure.
Notes:
• Inches is the U.S. factory default setting.
•
Millimeters is the international factory default setting.
Portrait Width
3.54–48 inches
89.9–1219 mm
Set the portrait width.
Notes:
•
If the width exceeds the maximum, then the printer uses the
maximum width allowed.
• 12 inches is the U.S. factory default setting. You can increase the
width in 0.01
‑
inch increments.
•
305 mm is the international factory default setting. You can increase
the width in 1
‑
mm increments.
Portrait Height
5.5–48 inches
139.7–1219 mm
Set the portrait height.
Notes:
•
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
•
17 inches is the U.S. factory default setting. You can increase the
height in 0.01
‑
inch increments.
• 432 mm is the international factory default setting. You can increase
the height in 1
‑
mm increments.
Feed Direction
Short Edge
Long Edge
Specify the feed direction if the paper can be loaded in either direction.
Notes:
•
Short Edge is the factory default setting.
•
Long Edge appears only when the longest edge is shorter than the
maximum width supported in the tray.
Bin Setup menu
Use To
Output Bin
Standard Bin
Bin [x]*
Specify the default bin.
Note: Standard Bin is the factory default setting.
* [x] can be any number from 1 to 4 if the appropriate optional bins are installed. If multiple bins are assigned the same
name, then the name appears only once in the bin list.
Understanding the printer menus 126