Lexmark MS910 Series, Руководство пользователя

Страница: 40 / 260

Setting up the printer software
Installing the printer
1
Obtain a copy of the software installer package.
2
Run the installer, and then follow the instructions on the computer screen.
3
For Macintosh users, add the printer.
Note: Obtain the printer IP address from the TCP/IP section in the Network/Ports menu.
Adding available options in the print driver
For Windows users
1
Open the printers folder.
2
Select the printer you want to update, and then do the following:
•
For Windows 7 or later, select Printer properties .
•
For earlier versions, select Properties .
3
Navigate to the Configuration tab, and then select Update Now
‑
Ask Printer .
4
Apply the changes.
For Macintosh users
1
From System Preferences in the Apple menu, navigate to your printer, and then select Options & Supplies .
2
Navigate to the list of hardware options, and then add any installed options.
3
Apply the changes.
Networking
Notes:
•
Purchase a MarkNet N8350 wireless network adapter before setting up the printer on a wireless
network. For information on installing the wireless network adapter, see the instruction sheet that came
with the adapter.
•
A Service Set Identifier (SSID) is a name assigned to a wireless network. Wired Equivalent Privacy (WEP),
Wi-Fi Protected Access (WPA), WPA2, and 802.1X-RADIUS are types of security used on a network.
Preparing to set up the printer on an Ethernet network
To configure your printer to connect to an Ethernet network, organize the following information before you
begin:
Additional printer setup 40