331 error messages
Error code
Description
Action
331.51
Motor 1 (Pick/Lift) motor no first encoder
Go to
“Option tray pick/lift motor service check”
.
331.52
Motor 1 (Pick/Lift) motor stop error
331.53
Motor 1 (Pick/Lift) PWM underflow (motor
overspeed)
332 error messages
Error code
Description
Action
332.54
Motor 2 (Separator/Pass through) Motor no first
encoder
“Option tray separator/pass through
motor service check” on page 152
332.55
Motor 2 (Separator/Pass through) motor stop error
332.56
Motor 2 (Separator/Pass through) PWM underflow
(motor overspeed)
334 error messages
Error code
Description
Action
334.57
Motor 3 motor no first encoder
“Option tray ACM motor service check” on
334.58
Motor 3 motor stop error
334.59
Motor 3 PWM underflow (motor overspeed)
335 error messages
Error code
Description
Action
335.60
Hardware error—Board ID unknown
“Option tray controller card service check”
335.61
Hardware error—Option type unknown
335.62
Hardware error—Product ID unknown
335.63
Hardware error—Sensors are not plugged on the
board.
341 error messages
Error code
Description
Action
341.51
Motor 1 (Pick/Lift) motor no first encoder
Go to
“Option tray pick/lift motor service check”
.
341.52
Motor 1 (Pick/Lift) motor stop error
341.53
Motor 1 (Pick/Lift) PWM underflow (motor
overspeed)
4514-2xx
Diagnostics and troubleshooting
150
Содержание MS310 4514-220
