Lexmark M3250 Скачать руководство пользователя страница 120

Страница: 120 / 187

Internal solutions port does not operate correctly

Action

Yes

Step 1

Print a menu settings page, and then check if the internal solutions
port (ISP) appears in the Installed Features list.

Is the ISP listed in the Installed Features list?

Go to step 3.

Go to step 2.

Step 2

Remove, and then install the ISP. For more information, see

“Installing an internal solutions port” on page 161

Note:

Use a supported ISP.

Does the ISP operate correctly?

The problem is
solved.

Go to step 3.

Step 3

Check the cable and the ISP connection.

Use the correct cable, and then make sure that it is securely
connected to the ISP.

Check if the ISP solution interface cable is securely connected
into the receptacle of the controller board.

Does the ISP operate correctly?

The problem is
solved.

Contact

customer

support

Defective ﬂash detected

Try one or more of the following:

•

Replace the defective ﬂash memory.

•

From the printer control panel, select

Continue

to ignore the message and continue printing.

•

Cancel the current print job.

Not enough free space in ﬂash memory for resources

Try one or more of the following:

•

From the printer control panel, select

Continue

to clear the message and continue printing.

•

Delete fonts, macros, and other data stored in the ﬂash memory.

•

Install ﬂash memory with larger capacity.

Note:

Downloaded fonts and macros that are not previously stored in the ﬂash memory are deleted.

Troubleshooting

120

Содержание M3250




























































































































































































Результаты поиска

Содержание M3250

Отзывы:

Похожие инструкции для M3250

Бренды по названию

Популярные бренды

Lexmark M3250, Руководство пользователя

Результаты поиска

Содержание M3250

Отзывы:

Похожие инструкции для M3250

Бренды по названию

Популярные бренды