manualshive.com logo in svg

Lexmark M124x, Руководство по обслуживанию

Принтер Lexmark M124x - надежное устройство для малого офиса или домашнего использования. Вы можете бесплатно скачать сервисный мануал и руководство пользователя на нашем сайте. Получите детальные инструкции по обслуживанию и эксплуатации принтера, чтобы сохранить его в отличном состоянии.

Поделиться
Скачать
background image

Safety information

•

The safety of this product is based on testing and approvals of the original design and specific components.
The manufacturer is not responsible for safety in the event of use of unauthorized replacement parts.

•

The maintenance information for this product has been prepared for use by a professional service person
and is not intended to be used by others.

•

There may be an increased risk of electrical shock and personal injury during disassembly and servicing of
this product. Professional service personnel should understand this risk and take necessary precautions.

CAUTION—SHOCK HAZARD: 

When you see this symbol, there is a danger from hazardous voltage

in the area of the product where you are working. Unplug the product before you begin, or use
caution if the product must receive power in order to perform the task.

CAUTION—POTENTIAL INJURY: 

The lithium battery in this product is not intended to be replaced.

There is a danger of explosion if a lithium battery is incorrectly replaced. Do not recharge,
disassemble, or incinerate a lithium battery. Discard used lithium batteries according to the
manufacturer's instructions and local regulations.

Consignes de sécurité

•

La sécurité de ce produit est basée sur des tests et certifications de sa conception d'origine et de ses
composants spécifiques. Le fabricant décline toute responsabilité en cas d'utilisation de pièces de rechange
non autorisées.

•

Les informations de maintenance de ce produit sont destinées à des professionnels qualifiés et ne sont pas
conçues pour être utilisées par d'autres personnes.

•

Il existe un risque potentiel de choc électrique et de blessures lors du démontage et de la maintenance de
ce produit. Le personnel professionnel de maintenance doit comprendre les risques et prendre les
précautions nécessaires.

ATTENTION—RISQUE D'ELECTROCUTION : 

Ce symbole indique un danger lié à des niveaux de

tension dangereux dans la zone du produit à manipuler. Débranchez le produit avant de commencer,
ou agissez avec prudence si le produit doit être alimenté pour effectuer l'opération.

ATTENTION—RISQUE DE BLESSURE : 

La batterie lithium de ce produit n'est pas destinée à être

remplacée. Si vous ne respectez pas les instructions de remplacement de la batterie, vous risquez
de provoquer une explosion. Ne rechargez pas, ne désassemblez pas et ne brûlez pas la batterie au
lithium. Mettez les batteries lithium usagées au rebut selon les instructions du fabricant et les
réglementations locales.

Informació de seguretat

•

La seguretat d'aquest producte es basa en les proves i les homologacions del disseny original i dels
components específics. El fabricant no és responsable de la seguretat en el cas d'ús de peces de recanvi
no autoritzades.

•

La informació de manteniment d'aquest producte s'ha preparat per a l'ús d'un professional tècnic i no per
a l'ús d'altres persones.

•

És possible que el risc de descàrrega elèctrica i lesions personals augmenti durant el desmuntatge i les
tasques de manteniment d'aquest producte. El professional tècnic ha de comprendre aquest risc i prendre
les precaucions necessàries.

PRECAUCIÓ. PERILL DE DESCÀRREGA ELÈCTRICA: 

Quan vegeu aquest símbol, indica que hi ha

un perill de voltatge elevat en l'àrea del producte on esteu treballant. Desconnecteu el producte
abans de començar o tingueu precaució si el producte ha de rebre alimentació per realitzar la tasca.

4600-830, -835, -895

Notices, conventions, and safety information

13

Содержание M124x































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для M124x

Datamax I-Class Mark II Installation And Use Manual preview
I-Class Mark II
Бренд: Datamax Страницы: 12
NEC 870 - SuperScript B/W Laser Printer Network User'S Manual preview
870 - SuperScript B/W Laser Printer
Бренд: NEC Страницы: 52
NEC SuperScript 1800 Quick Start Manual preview
SuperScript 1800
Бренд: NEC Страницы: 8
3D Systems Figure 4 Standalone Quick Start Manual preview
Figure 4 Standalone
Бренд: 3D Systems Страницы: 2
Chamjin I&C CJ50SP User Manual preview
CJ50SP
Бренд: Chamjin I&C Страницы: 21
Samsung CLP-600 Series User Manual preview
CLP-600 Series
Бренд: Samsung Страницы: 115
Ricoh AP-P2 G188 Field Service Manual preview
AP-P2 G188
Бренд: Ricoh Страницы: 682
Oki LE840D Safety Information Manual preview
LE840D
Бренд: Oki Страницы: 28
HPRT HM-A300S Quick Start Manual preview
HM-A300S
Бренд: HPRT Страницы: 2
Konica Minolta AccurioPrint 2100 Shortcut Manual preview
AccurioPrint 2100
Бренд: Konica Minolta Страницы: 32
MAC TOOLS P 9300 Instruction Manual preview
P 9300
Бренд: MAC TOOLS Страницы: 2
A&D TM-2480 Instruction Manual preview
TM-2480
Бренд: A&D Страницы: 66
Printronix P9212 Setup Manual preview
P9212
Бренд: Printronix Страницы: 206
Savin MLP175n Brochure & Specs preview
MLP175n
Бренд: Savin Страницы: 4
Xante Assel-a-Writer-8300 Instruction Manual preview
Assel-a-Writer-8300
Бренд: Xante Страницы: 338
Xerox ApeosPort C6550 I Network Administrator'S Manual preview
ApeosPort C6550 I
Бренд: Xerox Страницы: 132
CraftUnique CraftBot PlusPro Quick Start Manual preview
CraftBot PlusPro
Бренд: CraftUnique Страницы: 2
Lexmark CX510 series Product Specifications preview
CX510 series
Бренд: Lexmark Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды