![Lexmark CX920 Скачать руководство пользователя страница 170](http://html1.mh-extra.com/html/lexmark/cx920/cx920_user-manual_1889865170.webp)
Maintenance kits
Part number
HCF rollers maintenance kit
41X1874
Lexmark CX922, CX923, and CX924 maintenance kits
Maintenance kits
Part number
300K transfer belt maintenance kit
41X2090
Fuser maintenance kit
41X1505
Lexmark CX920, CX921, and CX927 maintenance kits
Maintenance kits
Part number
300K transfer belt maintenance kit
41X1593
Fuser maintenance kit, 100 V
41X2060
Fuser maintenance kit, 110 V
41X2061
Fuser maintenance kit, 120 V
41X1860
Fuser maintenance kit, 230 V
41X1861
Configuring supply notifications
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click
Settings
>
Device
>
Notifications
.
3
From the Supplies menu, click
Custom Supply Notifications
.
4
Select a notification for each supply item.
5
Apply the changes.
Maintaining the printer
170
Содержание CX920
