•
Keep the printer:
–
Clean, dry, and free of dust.
–
Away from stray staples and paper clips.
–
Away from the direct airflow of air conditioners, heaters, or ventilators.
–
Free from direct sunlight and humidity extremes.
•
Observe the recommended temperatures and avoid fluctuations:
Ambient temperature 10 to 32.2°C (50 to 90°F)
Storage temperature
-40 to 43°C (-40 to 110°F)
•
Allow the following recommended amount of space around the printer for proper ventilation:
1
Top
178 mm (7 in.)
2
Right side 127 mm (5 in.)
3
Front
508 mm (20 in.)
4
Left side
127 mm (5 in.)
5
Rear
76 mm (3 in.)
Printer configurations
CAUTION—TIPPING HAZARD:
Installing one or more options on your printer or MFP may require a
caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported configurations, see
www.lexmark.com/multifunctionprinters
.
CAUTION—TIPPING HAZARD:
To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
You can configure your printer by adding three optional 550
‑
sheet trays.
Learning about the printer
10
Содержание CS720 Series
