Lexmark CS410 series, Руководство пользователя

Страница: 186 / 210

Action Yes No
Step 3
Check if you are using a recommended type of paper.
a
Load paper source with a recommended type of paper.
b
Resend the print job.
Do vertical voids appear on prints?
Go to step 4. The problem is
solved.
Step 4
a
Remove, and then reinstall the imaging kit.
Warning—Potential Damage: Do not expose the imaging kit
to direct light for more than 10 minutes. Extended exposure
to light may cause print quality problems.
Warning—Potential Damage: Do not touch the underside of
the imaging kit. This could damage the imaging kit.
b
Resend the print job.
Do vertical voids appear on prints?
Go to step 5. The problem is
solved.
Step 5
Replace the imaging kit, and then resend the print job.
Do vertical voids appear on prints?
Contact customer
support .
The problem is
solved.
Uneven print density
Action Yes No
Replace the imaging kit, and then resend the print job.
Is the print density uneven?
Contact customer
support .
The problem is
solved.
Troubleshooting 186