Lexmark CS410 series, Руководство пользователя

Страница: 172 / 210

Action Yes No
Step 1
Reduce the toner darkness.
a
From the Quality menu on the printer control panel, reduce the
toner density.
Note: 4 is the factory default setting.
b
Resend the print job.
Did the gray background disappear?
The problem is
solved. Go to step 2.
Step 2
a
Remove, and then reinstall the imaging kit.
Warning—Potential Damage: Do not expose the imaging kit
to direct light for more than 10 minutes. Extended exposure
to light may cause print quality problems.
Warning—Potential Damage: Do not touch the underside of
the imaging kit. This could damage the imaging kit.
b
Resend the print job.
Did the gray background disappear?
The problem is
solved. Contact customer
support .
Horizontal voids appear on prints
L eading edge
Trai l ing edge
Action Yes No
Step 1
a
Make sure your software program is using a correct fill pattern.
b
Resend the print job.
Do horizontal voids appear on prints?
Go to step 2. The problem is
solved.
Step 2
a
Load the specified tray or feeder with a recommended type of
paper.
b
Resend the print job.
Do horizontal voids appear on prints?
Go to step 3. The problem is
solved.
Troubleshooting 172