Lexmark C9235 Скачать руководство пользователя страница 129

Страница: 129 / 246

•

Any cart used to move the hardware options must have a surface able to support the dimensions of the
options.

•

Keep the printer in an upright position.

•

Avoid severe jarring movements.

•

Make sure that your ﬁngers are not under the printer when you set it down.

•

Make sure that there is adequate clearance around the printer.

Note:

Damage to the printer caused by improper moving is not covered by the printer warranty.

Shipping the printer

For shipping instructions, go to

http://support.lexmark.com

or contact customer support.

Saving energy and paper

Conﬁguring the power save mode settings

Sleep mode

From the home screen, touch

Settings

Device

Power Management

Timeouts

Sleep Mode

Specify the amount of time that the printer stays idle before it enters Sleep Mode.

Hibernate mode

From the home screen, touch

Settings

Device

Power Management

Timeouts

Hibernate Timeout

Select the amount of time that the printer stays idle before it enters Hibernate mode.

Notes:

•

For Hibernate Timeout to work, set Hibernate Timeout on Connection to Hibernate.

•

The Embedded Web Server is disabled when the printer is in Hibernate mode.

Adjusting the brightness of the printer display

From the home screen, touch

Settings

Device

Preferences

Screen Brightness

Adjust the setting.

Conserving supplies

•

Print on both sides of the paper.

Note:

Two-sided printing is the default setting in the print driver.

•

Print multiple pages on a single sheet of paper.

•

Use the preview feature to see how the document looks like before printing it.

•

Print one copy of the document to check its content and format for accuracy.

Maintaining the printer

129

Содержание C9235























































































































































































































































Результаты поиска

Содержание C9235

Отзывы:

Похожие инструкции для C9235

Бренды по названию

Популярные бренды

Lexmark C9235, Руководство пользователя

Результаты поиска

Содержание C9235

Отзывы:

Похожие инструкции для C9235

Бренды по названию

Популярные бренды