Macintosh
35
Install drivers for network printing
L
e
xm
ar
k Co
nf
id
en
ti
al
u
n
ti
l an
no
un
ced - Re
vi
si
on:
02
/18
/05
5
Click Continue on the Welcome screen and again after viewing the Readme file.
Note: A PPD for your printer is also available in a downloadable software package on the
Lexmark Web site at www.lexmark.com.
6
Click Continue after viewing the license agreement, and click Agree to accept the terms of
the agreement.
7
Select a Destination, and click Continue.
8
On the Easy Install screen, click Install. All the necessary software is installed on your
computer.
9
Click Close when installation is complete.
Step 2: Create a print queue in Print Center or Printer Setup Utility
1
Open Finder, click Applications, and click Utilities.
2
Double-click Print Center or Printer Setup Utility.
3
Choose Add Printer from the “Printers” menu.
4
Choose AppleTalk from the pop-up menu.
Note: If you don’t know which zone or printer to select, look on the network setup page
under the “AppleTalk” heading.
5
Select the AppleTalk zone from the list.
6
Select the new printer from the list, and click Add.
7
Verify printer installation:
a
Open Finder, click Applications, and click TextEdit.
b
Choose Print from the “File” menu.
c
Choose Summary from the “Print Panel” menu.
Note: If you don’t know which printer to select, look on the Network Setup page under the
“AppleTalk” heading to find the default name of the printer.
•
If the PPD file displayed in the Summary window is correct for your printer, then
printer setup is complete.
•
If the PPD file displayed in the Summary window is not correct for your printer, delete
the printer from the printer list in Print Center or Printer Setup Utility, and repeat
.
