Lexmark C6160 Скачать руководство пользователя

Страница: 9 / 142

What are you looking for?

Find it here

The latest supplemental information, updates, and customer
support:

•

Documentation

•

Driver downloads

•

Live chat support

•

‑

mail support

•

Voice support

Go to

http://support.lexmark.com

Note:

Select your country or region, and then

select your product to view the appropriate
support site.

Support contact information for your country or
region can be found on the website or on the
printed warranty that came with the printer.

Have the following information ready when you
contact customer support:

•

Place and date of purchase

•

Machine type and serial number

•

Safety information

•

Regulatory information

•

Warranty information

•

Environmental information

Warranty information varies by country or region:

•

In the U.S.

—See the Statement of Limited

Warranty included with the printer, or go to

http://support.lexmark.com

•

In other countries and regions

—See the

printed warranty that came with the printer.

Product Information Guide

—See the

documentation that came with the printer or go to

http://support.lexmark.com

Selecting a location for the printer

When selecting a location for the printer, leave enough room to open trays, covers, and doors and to install
hardware options.

•

Set up the printer near an electrical outlet.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, do not place or use this product

near water or wet locations.

•

Make sure that airﬂow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical
Committee 156 standard.

•

Provide a ﬂat, sturdy, and stable surface.

Learning about the printer

Содержание C6160















































































































































Результаты поиска

Содержание C6160

Отзывы:

Похожие инструкции для C6160

Бренды по названию

Популярные бренды

Lexmark C6160, Руководство пользователя

Результаты поиска

Содержание C6160

Отзывы:

Похожие инструкции для C6160

Бренды по названию

Популярные бренды