Lexmark C4342, Руководство пользователя

Страница: 25 / 235

3
Apply the changes.
Setting up and using the accessibility features
Activating Voice Guidance
From the home screen
1
In one motion and using one finger, slowly swipe left then up on the display until you hear a voice message.
Note: For printer models without built-in speakers, use headphones to hear the message.
2
Using two fingers, touch OK .
Note: If the gesture does not work, then apply more pressure.
From the keyboard
1
Press and hold the 5 key until you hear a voice message.
Note: For printer models without built-in speakers, use headphones to hear the message.
2
Press Tab to navigate the focus cursor to the OK button, and then press Enter .
Notes:
•
When Voice Guidance is activated, always use two fingers to select any item on the display.
•
Voice Guidance has limited language support.
Deactivating Voice Guidance
1
In one motion and using one finger, slowly swipe left then up on the display until you hear a voice message.
Note: For printer models without built-in speakers, use headphones to hear the message.
2
Using two fingers, do either of the following:
•
Touch Voice Guidance , then touch OK .
•
Touch Cancel .
Note: If the gesture does not work, then apply more pressure.
You can also deactivate Voice Guidance by doing either of the following:
•
Using two fingers, double tap the home screen.
•
Press the power button to put the printer in Sleep or Hibernate mode.
Navigating the screen using gestures
Notes:
•
Most of the gestures are applicable only when Voice Guidance is activated.
•
Enable Magnification to use the zoom and pan gestures.
•
Use a physical keyboard to type characters and adjust certain settings.
Set up, install, and configure 25