For Macintosh users
1
From System Preferences in the Apple menu, navigate to your printer, and then select
Options & Supplies
.
2
Navigate to the list of hardware options, and then add any installed options.
3
Apply the changes.
Networking
Connecting the printer to a Wi
‑
Fi network
Note:
This feature is available only in some printer models.
Before you begin, make sure that:
•
Active Adapter is set to Auto. From the control panel, navigate to:
Settings
>
Network/Ports
>
Network Overview
>
Active Adapter
For non-touch-screen printer models, press
to navigate through the settings.
•
The Ethernet cable is not connected to the printer.
Using the wireless setup wizard in the printer
Notes:
•
These instructions apply only to some printer models.
•
Before using the wizard, make sure that the printer firmware is updated. For more information, see
.
1
From the home screen, touch
>
Set up now
.
2
Select a Wi
‑
Fi network, and then type the network password.
3
Touch
Done
.
Using the Settings menu in the printer
1
From the control panel, navigate to:
Settings
>
Network/Ports
>
Wireless
>
Setup On Printer Panel
For non-touch-screen printer models, press
to navigate through the settings.
2
Select a Wi
‑
Fi network, and then type the network password.
Note:
For Wi
‑
Fi
‑
network
‑
ready printer models, a prompt to set up the Wi
‑
Fi network appears during initial
setup.
Set up, install, and configure
29
