Lexmark C2132, Руководство пользователя

Страница: 205 / 226

Prints on color transparencies appear dark when projected
Note: This problem occurs when projecting transparencies with reflective overhead projectors. To obtain the
highest projected color quality, transmissive overhead projectors are recommended.
Action Yes No
Step 1
From the printer control panel, make sure the paper type setting
is set to Transparency.
Is the paper type setting correct?
Go to step 2. Set the paper type to
Transparency.
Step 2
Reduce the toner darkness, and then resend the print job.
Does the print on the color transparency look lighter?
The problem is
solved. Go to step 3.
Step 3
Make sure you are using a recommended type of color
transparency, and then resend the print job.
Does the print on the color transparency look lighter?
The problem is
solved. Contact customer
support .
The color of the print does not match the color of the original file
Note: The color conversion tables used in Auto Color Correction mode generally approximate the colors of a
standard computer monitor. However, because of technology differences that exist between printers and
monitors, there are many colors that can also be affected by monitor variations and lighting conditions.
Action Yes No
Step 1
a
Set Color Correction to Off.
Note: When the printer color correction is disabled, the color
is based on the print job information, and no color conversion
is implemented.
b
Resend the print job.
Does the color of the print match the color of the file on the
computer screen?
The problem is
solved. Go to step 2.
Step 2
From the Quality menu on the printer control panel, do the
following:
a
Select Color Correction , and then select Manual .
b
Select Manual Color , and then select the appropriate color
conversion table for the affected object type.
c
Resend the print job.
Does the color of the print match the color of the file on the
computer screen?
The problem is
solved. Contact customer
support .
Troubleshooting 205