Lexmark 4227-100, Руководство по обслуживанию

Страница: 60 / 134

3-5
4227-100
Print Test
The Print Test prints:
•
The ASCII character set.
•
A line from each print wire.
•
The bidirectional print alignment pattern.
•
The contents of NVRAM.
•
The error log.
Other Print Tests
The following print tests are accessed outside the Service Menu:
•
A draft only 8 inch wide continuous print test. This test is
activated by turning the printer on with the Load/Unload and
LineFeed buttons pressed.
•
A draft only 13.6 inch wide continuous print test. This test is
activated by turning the printer on with the LineFeed and
FormFeed buttons pressed.
Note: These tests print a running page count at the bottom of each
page. Use the Start/Stop button to start and stop the test. Other
buttons that are active during this test are the
Micro
↓
or Micro
↑
, Load/Unload, LineFeed and FormFeed.
Print Demo and the Print Settings page are accessed from the
user menus. Print Settings prints Macro status and paper handling
settings and prints 8 inches wide.