Lexmark 250d - E B/W Laser Printer, Руководство по обслуживанию

Страница: 83 / 164

Diagnostic aids
3-5
4512-220, -230
Setup
Use the Setup menu to configure how the printer formats the end of a line depending on the computer system
being used.
Parallel
Use the Parallel menu to change printer settings on jobs sent through a parallel port.
Menu item Use setting to Values
Demo Mode Put printer into demo mode where internal sheets print with each
press of
.
To deactivate, turn the printer off, and re-enter configuration group.
Set to deactivate.
Deactivate (default)
Activate
Auto CR
After LF Specify whether the printer automatically performs a carriage return
after a line feed control command. Off (default)
On
Auto LF after
CR Specify whether the printer automatically performs a line feed after a
carriage return control command. Off (default)
On
Energy
Conserve When setting is on, the user cannot disable Power Saver. When off,
Power Saver will be off. Off
On (default)
Menu item Use setting to Values
NPA Mode Send print jobs to the printer and query printer status information
simultaneously. Off
On
Auto (default)
Protocol Receive information at a much higher transmission rate if the printer
is set to Fastbytes (if the computer supports Fastbytes) or receive
information at a normal transmission rate if the printer is set to
Standard. Standard
Fastbytes (default)
Parallel
Mode 2 Determine whether the parallel port data is sampled on the leading
(On) or trailing (Off) edge of strobe. Off
On (default)
MAC Binary
PS Configure the printer to process Macintosh binary PostScript print
jobs. Off–The printer filters
PostScript print jobs using
Standard protocol.
On–The printer processes raw
binary PostScript print jobs from
computers using the Macintosh
operating system. This setting
often causes Windows print jobs
to fail.
Auto (default)–The printer
processes print jobs from
computers using either
Windows or Macintosh
operating systems.