background image

Power source: 100-240V/AC

Power frequency: 50/60Hz

Transmission power: <0.3mW

Rated load:

2400W/10A,Max,tungsten(cosφ=1)(220-240V/AC)

600W/5A,Max,fluorescent(cosφ=0.5)(220-240V/AC)

1200W/10A,Max,tungsten(cosφ=1)(100-130V/AC)

300W/5A,Max,fluorescent(cosφ=0.5)(100-130V/AC)

Working temperature: -15°C~+70°C

Protection level: IP20,Class II

Installation sit: indoors, ceiling mounting

HF system: 5.8GHz CW electric wave,ISM band

Detection angle: 360°

Detection range: 1-11m  (radii.) (adjustable)

Time setting: 8sec-12min, (adjustable)

Light-control: 10-1000LUX, (adjustable)

Power consumption: approx.0.5W

Specifications

 LX-MV-360S13A Microwave Sensor Instruction

Summary

58.5mm

17.7mm

50mm

36mm

44mm

50mm

36mm 50mm

Features

This  is  a  hi-precision  digital  microwave  sensor  whose  detection  range  is  360°and  working  frequency  is 

5.8GHz. It is based on Doppler principle which integrates the emitting and receiving. It adopts MCU (Micro 

Control Unit) that greatly increases its precision and decreases its fault rate. It’s delicate in appearance and 

compact in structure. It can be independently connected to the loads or easily installed inside the lightings with 

lampshade made of glass or plastic. It is widely applied in the passageway, washroom, elevator, household or 

other public areas for security protection or energy saving. It applies for several technical patents and is the 

perfect choice for your intelligent living. 

1.Non-radiation harm

: its transmitter power is lower than 0.3mW, which does no harm to human body.

2.Reliable & Stable performance

: it applies the RC filtering and digital filtering in digital processing. It also 

uses the digital zero trigger technology, that is, at zero point it will be auto-connected or auto-disconnected. It 

uses the Tyco high-power relay to control output, which ensures its reliable performance. It adopts power 

management chip to guarantee its stable performance in 100-240V/AC.

3.Remote setting

: it is designed with the remote function, that is, you can preset its function by potentiometer 

or remote controller to your practical need.

EN 61058-1:2002+A2:2008 

EN 50317:2002 

EN 301 489-1 V1.8.1(2008-04) 

EN 301 489-3 V1.4.1(2002-08) 

EN 300 440-1 V1.5.1(2009-03) 

EN 300 440-2 V1.3.1(2009-03)

Содержание LX-MV-360S13A






Отзывы: