INSTALLATION
20
!
Wall Mount Bracket
Socket
Socket
Battery Wand Cover
Socket
Slot
Battery Pack Cover
Extension
Cable
Power Cable
from Shading
Battery Wand Cover
Slot
Socket
Power Cable
from Shade
STEP 6: IF USING A SATELLITE BATTERY PACK...
MOUNTING THE SATELLITE BATTERY PACK
• Decide where you want to mount the wall mount bracket.
A satellite battery pack may be mounted in any orientation.
• Mark the screw holes.
• Drill the screw holes using a
3
⁄
32
" drill bit.
• Remove the backing from the double-sided tape. Press the bracket into place.
• Attach the bracket using the screws provided.
• Position the battery pack so the power
cable is easily connected to the socket.
• Snap the battery pack into the bracket.
• Replace the cover with the slot aligned
to the socket in the battery pack.
• Plug the power cable from the
shade into the extension cable.
• Plug the other end of the extension cable into the
socket in the battery pack.
• Secure the extension cable using wire retainers (not provided)
• Install the battery wand cover with the slot aligned to the socket
in the battery wand.
• Plug the power cable from the shade into the extension cable.
• Plug the other end of the extension cable into the socket in the battery wand.
• Secure the power supply cable using wire retainers (not supplied). If hiding the
cable behind the shade, make sure it does not impede the operation of the shade.
CAUTION:
Make sure all extension cables are secured. Young children
can STRANGLE in cords. They can also wrap cords around their necks
and STRANGLE. Electrical shock and/or a fire hazard may occur, if not
properly installed.
IMPORTANT:
Be sure the cable does not become pinched by the battery wand
clip during installation. Damage or overheating of components could result.
OUTSIDE MOUNT (OM)
Battery-Powered Motorized Operating System
Socket
Wall Mount Bracket