7
Remote Control Guide
GETTING STARTED
BATTERY PLACEMENT
1. Remove the back cover, to expose the battery
compartment.
2. Use two new AAA Alkaline batteries (provided).
Slide a battery into each compartment being
sure to align correct positive and negative ends
and press into place.
3. Replace the back cover.
TOOLS NEEDED TO MOUNT REMOTE HOLDER
— Power drill
—
3
⁄
32
" drill bit
— Phillips screwdriver
— Pencil
— Drywall anchors, if mounted into drywall (not provided).
MOUNTING INSTRUCTIONS
1. Choose a location to mount the remote holder.
2. Orient the remote holder on the wall. Mark
screw holes.
3. If you are mounting the remote holder onto wood,
use a
3
⁄
32
" drill bit to drill the screw holes.
4. Attach the remote holder to the wall using the
screw provided.
5. Snap screw cover over screw.
6. Gently push the remote into the remote holder
until it is snug.
NOTE
: If you are mounting the Remote Holder onto
drywall, use drywall anchors.
Curved edge
should be
on top