12
You can turn on Light Detection in the VeSync
app. When this mode is turned on, the Light
Sensor will automatically adjust air purifier
settings based on the amount of light in the
room.
1.
The display will automatically turn off
when the room gets dark. If the air
purifier is in Auto Mode, it will not use the
high or turbo fan speeds, even when the
air quality is poor, to avoid making too
much noise.
2.
When the room becomes light again,
the air purifier will return to its previous
settings. The display will automatically
turn back on, and Auto Mode will no
longer be limited.
Light Detection
USING YOUR PURIFIER (CONT.)
The air purifier is in Standby Mode when it is
turned off, but plugged in.
Note:
Display Lock can be used while the
air purifier is in Standby Mode to keep
the air purifier from being turned back
on. The laser dust sensor will still detect
the surrounding air quality and give you
updates in the VeSync app.
When the air purifier is plugged in and turned
off, it will remember its previous fan speed,
Sleep Mode, Auto Mode, Display Lock,
Display Off, and Light Detection settings.
When the air purifier is unplugged and turned
off, it will only remember its previous fan
speed, Sleep Mode, Auto Mode, and Light
Detection settings.
Note:
The air purifier will remember the last
timer setting chosen (1–12 hours), but it will
not automatically resume the timer. You will
need to restart the timer after the air purifier
is turned back on.
Memory Function
Standby Mode
