Levo ALLOY Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 44

Levo ALLOY Скачать руководство пользователя страница 44

42

EN

FR

DE

CZ

SK

FREE

FREE

PL

ISED Statement

This device complies with Innovation, Science and Economic Development Canada license-

exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B)
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102
and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF
exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter. This equipment should be installed and operated with a minimum distance of 20

millimeters between the radiator and your body.

16. EC – DECLARATION OF CONFORMITY

The manufacturer:

Specialized Bicycle Components Inc.
15130 Concord Circle
Morgan Hill, CA 95037, USA
Tel: +1 408 779-6229

Hereby confirms for the following products:
Product description:

EPAC (Electrically Power Assisted Cycle)

Model designation:

LEVO SW LTD / LEVO SW CARBON / LEVO PRO

CARBON / LEVO EXPERT CARBON / LEVO COMP

ALLOY / LEVO ALLOY

The conformity with all applicable
directives from the guideline:

Machines (2006/42/EC).

The machine also conforms to all the
directives in the guidelines:

Electromagnetic Compatibility (2004/108/EC).
Radio Equipment (2014/53/EU)

The following harmonizing norms were
applied to the product:

EN 15194:2017 Cycles - Electrically power assisted cycles
- EPAC Bicycles

Serial number:

Frame decal adhered to the back page of the user manual

Technical documentation by:

Specialized Europe GmbH
Werkstattgasse 10 6330 Cham, Switzerland

Signature:

Jan Talavasek
(Sr. Director Turbo)

Specialized Europe GmbH, 6330 Cham, Switzerland, April 1st, 2020

NOTE: THIS DECLARATION OF CONFORMITY APPLIES ONLY TO BICYCLES SOLD IN COUNTRIES
FOLLOWING THE CE MARKING DIRECTIVES.
NOTE: IN ORDER TO CONNECT THE BICYCLE AND THIS USER MANUAL TOGETHER, THE YELLOW
SERIAL NUMBER DECAL LOCATED ON THE FRAME OF THE BICYCLE MUST BE PLACED OVER THE
FACSIMILE OF THE DECAL ON THE BACK PAGE OF THIS USER MANUAL.

«
...
42
43
44

Содержание ALLOY













































Отзывы:

Нет отзывов