16
EN
FR
DE
CZ
SK
FREE
FREE
PL
8.9. CHANGING SUPPORT MODES ON THE REMOTE (TCU 2)
B
D
C
A
8.10
Fig. 8.10
A - F1 BUTTON:
•
Toggles pages on the TCU 2.
•
Settings & Menu navigating.
B - F2 BUTTON:
•
Pressing and holding activates the walk-assist mode. This provides motor assist at 6 km/h / 3.7
mph to help push the bicycle uphill when walking.
Settings & Menu navigating.
C - (+) BUTTON:
•
Short press increases the amount of support.
•
Long press toggles standard modes and Micro Tune mode.
D - (-) BUTTON:
•
Short press decreases the amount of support.
•
Long press resets the trip.
C&D - (-+) DUAL BUTTON PRESS:
•
Long dual press opens the settings menu on the TCU 2.
NOTE: On the remote, after reaching the strongest or weakest mode, the system will not
continue to switch. To reduce from TURBO to TRAIL to ECO to OFF, you have to press the -
button. To increase from OFF to ECO to TRAIL to TURBO, you have to press the + button.
8.10. CONNECTIVITY OPTIONS
The Turbo Technology System provides a high degree of interface flexibility through Bluetooth
and/or ANT+ connectivity.
BLUETOOTH LOW ENERGY (BLE)
BLE is used for connecting to the bike to the Mission Control app.
ANT+
ANT+can be used to connect to the sensors for Speed, Rider Power, and Cadence. The
sensor data can be received via the ANT+ module built into the TCU.
In your ANT+ device, search for those sensors and connect to them.
Some bicycle-specific ANT+ devices feature so-called "LEV" data fields you can use to see
all available e-bike data.
8.11. ERROR CODES (TCU 1)
The Levo is equipped with a built-in diagnostic system to automatically check and identify the
functionality of the system. If the system detects an error, the TCU display will alert the user
with an error code of red and blue LEDs, as shown below.
If you receive such an error, please restart the system. If the error message continues to
be shown, please contact your Authorized Specialized Retailer for further instructions.
Depending on the type of error message, the system may be switched off automatically. In
any case, the bicycle can be ridden without motor support, with the system turned off.
Mission Control supports the rider with User Actions for errors and diagnostic
reports which can be shared with Retailers who can give further advice based
on the bicycle serial number.
