14
3.
Preparing the wheelchair for use and operation
3.1.
Dispatch and transport
For delivering
LEVO
wheelchairs they are packed in a cardboard box. The back is
detached and carefully packed. Particularly delicate parts have extra protection
to avoid any damage that could be caused by transportation. All wheelchairs are
transported by lorry or air freight. To ensure no damage during transport the
main fuse is taken / switched off.
Initial operation / Main fuse handling in case of
replacement, transportation and storage
Installation of the
main fuse
Fuse version since April 2011
Before shipping, the 70A main
fuse is taken off. Before using
the chair the main fuse has to
be inserted. You shall do this
also when travelling by air
with this wheelchair.
The main fuse housing is under the chair cover in the rear.
To get access, carefully open the cover as shown above.
Open the fuse cover, insert the fuse which is delivered in a separate plastic bag and snap the
fuse cover back. Now the chair can be brought into standing position to get access to the
fuse cabling. Store the fuse cabling properly above the batteries and the main fuse housing
below the control system under the chairs cover.
Activating of the
main fuse
Cut out version
until March 2011
To activate the main fuse, push the button of the
cut out in
Main fuse
