1. Setting up the Time and the Date:
a) will be flashing. Press or to select the
hour and press to confirm your choice.
b) will be flashing. Press or to select the
minutes and press to confirm your choice.
c)
A
or
P
will be flashing. Press or to select
A
for
AM
or
P
for
PM
and press to confirm your choice.
NOTE:
Daylight Savings Time shall start at 2am on the
second Sunday of March (add one hour) and end at 2am
on the first Sunday of November (subtract one hour).
d) will be flashing. Use or to choose the year
and press to confirm your choice.
e) will be flashing. Use or to choose the
month and press to confirm your choice
f) will be flashing. Use or to choose the date
and press to confirm your choice. The day of week
will automatically adjust.
2. Programming your Timer Options:
a)
Setting Sunup, Sundown, desired Offset Time and
Time Zone: Sunup and Sundown
are automatically
adjusted using the latitude and longitude
coordinates of your location. To obtain these
coordinates go to
www.leviton.com/VPT24
and
click on
Longitude/Latitude Coordinates Lookup...
Type in your home address and press enter. Your
latitude (N) and longitude (W) coordinates will be
shown on the screen. Write down only the 2 or 3
digit number. Disregard a negative symbol (–) if it
precedes the number.
Programming Guide
SET
SET
SET
SET
SET
SET
A
A
Override button
Door held open
To exit programming at any time press override button -
To program your device:
a) Perform a
System Reset
by gently lifting the VPT24 door
from the bottom of the push pad until an audible click is
heard. The door will stay open while you are
programming the device:
b) Press and hold followed by (Override) until
stops flashing and flashes (approximately
10 seconds). Press to confirm device
Reset
.
c) Product will go through a brief self test.
Pro Mode
provides up to 50 ON/OFF events for any day or combination of days,
M-Su, M-F
, or
Sa-Su
at
desired fixed times or self adjusting
Sunup
and
Sundown
times. In this mode self adjusting
Daylight
Savings Time
and random modes are also available.
SET
SET
MENU
Do you have a California-exclusive model VPT24?
If you're unsure, press 3 times until RND displays, then press . '6 Hr' will display on California-exclusive models.
VPT24
