Assembling the stand
Lay the right side (G) on a flat surface. Insert 7 dowels into the drilled
holes. Using the screwdriver, insert 6 cam lock screws into the plastic
inserts in preparation for attaching the rear panel, bottom and top shelf.
Attach the rear panel (B) by sliding over dowels. Attach the bottom (D),
using 2 cam lock nuts to tighten. Attach the top shelf (C) using 2 cam lock
nuts to tighten.
Lay the left side (F) on a flat surface and repeat the steps above.
2
H A R L E Q U I N L I B R A R Y S T A N D
Checking the parts
Unpack your library stand, and set all of the parts on a soft surface to avoid
scratching. You should have all of the parts listed below, as well as the
hardware listed.
Our Harlequin Library Stand brings stature to
reading, with a display space fitting for a large
art book or dictionary, especially with the deep
lip to hold it. The bright-field magnifier nestled
in the leather-lined well has a 3x acrylic lens
that draws light to its surface for even sharper
magnification. A sliding tray offers a handy
spot for writing notes and slides to either the
right or left side. The stand also works as a
lectern. When fully assembled, it measures
21W x 20D x 41
1
⁄
2
H.
1
B U I L D I N G Y O U R S TA N D
a 18 dowels
b
12 cam lock nuts
c
12 cam lock screws
d
2 bolts (
1
⁄
4
" x 1")
e
2 locking washers
f
2 flat washers
g
screwdriver
