HUBBLE series
System Administrator’s
Manual
26
Optical PTZ
With PTZ cameras, you may define what area to see and how close to see the view through
panning, tilting and zooming the camera lens. Specific areas with preferred pan, tilt, zoom
settings can be defined and saved as present points. At the time of writing this documentation,
preset points can be configured and saved thru the NVR remote client or the camera’s web
configurator. Once saved, the NVR can then be set to point to this view upon event triggering
or user’s command. Please note that, the PTZ-related settings you configure here will
overwrite those on the camera’s firmware.
Right-click on the channel to display the pop-up menu, then select
Optical PTZ
. A red
cross-hair will appear on the live view screen to indicate it is on PTZ mode.
Click anywhere on the screen to pan the camera towards that direction.
Use the mouse scroll wheel up and down to zoom in and zoom out on the image.
To close PTZ mode, right-click again on the channel to display the pop-up and click
Optical
PTZ
.
