manualshive.com logo in svg

LevelOne GTL-2881, Руководство пользователя

Поделиться
Скачать
LevelOne GTL-2881 Скачать руководство пользователя страница 628

Chapter 16

  |  IP Services

Dynamic Host Configuration Protocol

–  628  –

◆

By default, DHCP option 66/67 parameters are not carried in a DHCP server 
reply. To ask for a DHCP reply with option 66/67 information, the DHCP client 
request sent by this switch includes a “parameter request list” asking for this 
information. Besides, the client request also includes a “vendor class identifier” 
that allows the DHCP server to identify the device, and select the appropriate 
configuration file for download. This information is included in Option 55 and 
124. 

◆

The server should reply with the TFTP server name and boot file name.

◆

Note that the vendor class identifier can be formatted in either text or 
hexadecimal, but the format used by both the client and server must be the 
same.

Parameters

These parameters are displayed:

◆

VLAN

 – ID of configured VLAN.

◆

Vendor Class ID

 – The following options are supported when the check box is 

marked to enable this feature:

■

Default

 – The default string is the model number.

■

Text

 – A text string. (Range: 1-32 characters)

■

Hex

 – A hexadecimal value. (Range: 1-64 characters)

Web Interface

To configure a DHCP client identifier:

1.

Click IP Service, DHCP, Client.

2.

Mark the check box to enable this feature. Select the default setting, or the 
format for a vendor class identifier. If a non-default value is used, enter a text 
string or hexadecimal value.

3.

Click Apply.

Table 40: Options 55 and 124 Statements 

Option

Statement

Keyword

Parameter

55

dhcp-parameter-request-list

a list of parameters, separated by ','

124

vendor-class-identifier

a string indicating the vendor class identifier

Содержание GTL-2881



































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды