LevelOne GEP-1070 Скачать руководство пользователя страница 295

Страница: 295 / 319

295

7.4. Configuration

Use the Maintenance Configuration pages to save the current configuration to a file on your

computer, or to restore previously saved configuration settings to the switch.

Saving Configuration Settings

Use the Configuration Save page to save the current configuration settings to a file on your

local management station.

PATH

Maintenance \ Configuration \ Save

Figure 154: Configuration Save

WEB INTERFACE

To save your current configuration settings:

1. Click Maintenance, Configuration, Save.

2. Click the “Save configuration” button.

3. Specify the directory and name of the file under which to save the current configuration

settings.

The configuration file is in XML format. The configuration parameters are represented as

attribute values. When saving the configuration from the switch, the entire configuration

including syntax descriptions is included in the file. The file may be modified using an editor

and loaded to a switch.

Upload Configuration Settings

Use the Configuration Upload page to restore previously saved configuration settings to the

switch from a file on your local management station.

PATH

Maintenance \ Configuration \ Upload

Содержание GEP-1070
































































































































































































































































































































Результаты поиска

Содержание GEP-1070

Отзывы:

LevelOne GEP-1070, Руководство пользователя, Страница: 295 / 319

Результаты поиска

Содержание GEP-1070

Отзывы: