LevelOne GEP-1070 Скачать руководство пользователя страница 20

Страница: 20 / 319

2. I

NITIAL

WITCH

ONFIGURATION

This chapter includes information on installations of the switch and basic configuration

procedures.

To make use of the management features of your switch, you must first configure it with an

IP address that is compatible with the network in which it is being installed. This should be

done before you permanently install the switch in the network.

Follow this procedure:

1. Place the switch close to the PC that you intend to use for configuration. It helps if you

can see the front panel of the switch while working on your PC.

2. Connect the Ethernet port of your PC to any port on the front panel of the switch. Connect

power to the switch and verify that you have a link by checking the front panel LEDs.

3. Check that your PC has an IP address on the same subnet as the switch. The default IP

address of the switch is

192.168.1.1

and the subnet mask is

255.255.255.0.

. The PC

and switch are on the same subnet if they both have addresses starting with

192.168.1.x

If the PC and switch are not on the same subnet, you must manually set the PC’s IP
address to

192.168.1.x

(where “x” is any number from 2 to 254, except 1).

4. Open your web browser and enter the address http://

192.168.1.1

. If your PC is properly

configured, you will see the login page of the switch. If you do not see the login page,

repeat step 3 or refer to Appendix B.2

“Accessing the Web page”.

5. Enter

“

admin

” for the user name and password, and then click on the Login button.

6. From the menu, click System, and then IP. To request an address from a local DHCP

Server, mark the DHCP Client check box. To configure a static address, enter the new IP

Address, IP Mask, and other optional parameters for the switch, and then click on the

Save button.

If you need to configure an IPv6 address, select IPv6 from the System menu, and either

submit a request for an address from a local DHCPv6 server by marking the Auto

Configuration check box, or configure a static address by filling in the parameters for an

address, network prefix length, and gateway router.

No other configuration changes are required at this stage, but it is recommended that you

change the admini

strator’s password before logging out. To change the password, click

Security and then Users. Select “

admin

” from the User Configuration list, fill in the Password

fields, and then click Save.

Содержание GEP-1070
































































































































































































































































































































Результаты поиска

Содержание GEP-1070

Отзывы:

LevelOne GEP-1070, Руководство пользователя, Страница: 20 / 319

Результаты поиска

Содержание GEP-1070

Отзывы: