LevelOne GEL-5261, Руководство пользователя, Страница: 226 / 570

– 226 –
Chapter 10
| Quality of Service
Attaching a Policy Map to a Port
Figure 135: Adding Rules to a Policy Map
To show the rules for a policy map:
1.
Click Traffic, DiffServ.
2.
Select Configure Policy from the Step list.
3.
Select Show Rule from the Action list.
Figure 136: Showing the Rules for a Policy Map
Attaching a Policy Map to a Port
Use the Traffic > DiffServ (Configure Interface) page to bind a policy map to a port.
Command Usage
First define a class map, define a policy map, and then bind the service policy to the
required interface.
Parameters
These parameters are displayed:
◆ Port – Specifies a port.