LevelOne GEL-1061 Скачать руководство пользователя страница 233

Страница: 233 / 500

Chapter 12

| Security Measures

AAA (Authentication, Authorization and Accounting)

– 233 –

■

VTY Method Name

– Specifies a user defined method name to apply to

Telnet and SSH connections.

Show Information – Summary

◆

Accounting Type

- Displays the accounting service.

◆

Method Name

- Displays the user-defined or default accounting method.

◆

Server Group Name

- Displays the accounting server group.

◆

Interface

- Displays the port, console or Telnet interface to which these rules

apply. (This field is null if the accounting method and associated server group
has not been assigned to an interface.)

Show Information – Statistics

◆

User Name

- Displays a registered user name.

◆

Accounting Type

- Displays the accounting service.

◆

Interface

- Displays the receive port number through which this user accessed

the switch.

◆

Time Elapsed

- Displays the length of time this entry has been active.

Web Interface

To configure global settings for AAA accounting:

Click Security, AAA, Accounting.

Select Configure Global from the Step list.

Enter the required update interval.

Click Apply.

Figure 142: Configuring Global Settings for AAA Accounting

Содержание GEL-1061





















































































































































































































































































































































































































































































































Результаты поиска

Содержание GEL-1061

Отзывы:

Похожие инструкции для GEL-1061

Бренды по названию

Популярные бренды

LevelOne GEL-1061, Руководство пользователя

Результаты поиска

Содержание GEL-1061

Отзывы:

Похожие инструкции для GEL-1061

Бренды по названию

Популярные бренды