
Chapter 2 Hardware Installation
http://www.level1.com
Page 7
Figure 2_4 Product rack installation drawing II
2.5
Hardware connection
1.
Establish a LAN connection
Connect the LAN port of the router or a PC or a hub or a switch in LAN with a network cable.
2.
Establish a WAN connection
Connect the WAN port of the router to the Internet with a network cable, as shown in the figure
below.
3.
Connect the power supply
Before connecting the power supply, make sure that both power supply and grounding are correct.
Figure 2_5 Establish a connection to LAN and WAN
Tip:
The above network connection diagram is for reference only. Please configure the
network architecture according to the actual situation and needs.
Содержание GBR-4001
Страница 191: ...http www level1 com Page 186...