Œ
Hardware Installation
Note
:
The Level One ISDN Router incorporates a DHCP Server.
If your LAN already has a DHCP Server, set DIP switch 2
ON to disable the ISDN Router's DHCP Server.
1. Use the supplied cable to connect the WAN port to
the S/T connector on your ISDN Terminator.
2. Connect the LAN port to a 10/100BaseT hub.
3. Connect the supplied power supply.
•
Software Installation
1. Insert the supplied CD-ROM. If the install program
does not start automatically, run SETUP.EXE in the
root directory.
2. Follow the prompts to complete the installation.
3. The setup program will now run.
Ž
Setup
1. Select the Level One ISDN Router, and click "Setup".
2. If the current IP Address is OK, you will not see the
following
IP Address
screen.
3. If you wish, change the suggested values.
Then click "Change" to continue.
4. Enter the required data on the
Quick Setup
screen
which appears next.
Internet Access (from ISP)
Account (User)
Name
Account name provided by your ISP
(Internet Service Provider).
Account
Password
Password for the above account.
IP Address
from ISP
Dynamic
IP addresses are the most
common. If
Fixed
, use the address
provided by your ISP.
- 1 -
- 2 -
- 3 -
