LevelOne FEP-0840, Руководство пользователя

Страница: 22 / 54

http://www.level1.com 22
Comment: Comment note for the switch.
System Version:
Displays the switch‟s firmware version.
Click Update button for exit.
4.3.4 Load Default Setting
The switch can be set to the default values by clicking the “ Load
” button.
*Note: This will NOT change the user ID, password, and IP configurations. It only
restore all default settings related to switch behavior.
4.3.5 Firmware Update
User need to enter the password twice and press Update button to update the firmware.
The smart switch will erase the flash memory. There is a self-protection mechanism in the
boot loader, so the boot loader will keep intact. The boot loader will restore the code to
firmware update page, even though the power is turned off or the cable link fails during the
firmware update procedure.
After pressing Update button, the old web code will be erased. Then you can select the new
image file and press “
Update
” button to update the firmware you need.